H378 No Residue rectangular VOID sticker for cell phones camera, 20x10mms red
The special sticker developed to overlapping the camera lens of a cell phone to prevent unauthorized taking photos in defined space. The sticker fulfil the requirements for very fast application, it is reliable avoidance of a camera using, and a seamless removing with guarantee of leaving no residue on the overlapped surfaces. An essential feature is the VOID layer that indicates any attempt to uncover the lens by highlighting the words VOID on the peeled off sticker part. ... More
Product description
The special sticker developed to overlapping the camera lens of a cell phone to prevent unauthorized taking photos in defined space. The sticker fulfil the requirements for very fast application, it is reliable avoidance of a camera using, and a seamless removing with guarantee of leaving no residue on the overlapped surfaces. An essential feature is the VOID layer that indicates any attempt to uncover the lens by highlighting the words VOID on the peeled off sticker part. In the case of uncovering the lens during the security check, the following safety procedure can be triggered according to the set safety scenario. The typical examples of use are the excursions of a group people in areas where taking a photography is not allowed, such as high-tech automotive industries, nuclear power stations, security printing spaces and other places with increased security mode.
The sticker can be printed with a corporate logo to maximize the security. The optimal security is also an incremental numbering of overlays.
The sticker has very similar properties like the rest of the offered seals from the group of non-residual stickers. However, this seal is optimized for cell phones surface finishes (smooth and rugged plastic, anodised light alloys, etched surface …) and its function is guaranteed for all types of portable camera devices.
The special technology of the VOID layer of this sticker guarantees the absence of residue after its removal and high adhesion even to problematic, not completely smooth surfaces. Unlike the other VOID stickers, this one does not separate when glued to the adhesive-retaining part attached to the substrate and to the top foil carrying the supplement of the revealed graphic motif. Although this sticker has very high adhesion to all types of surfaces, it does not leave any glue remains after removing. The glue consistency due to its cohesion is similar to gum. This, above all, also allows its application to complicated surfaces, from which the hologram stickers can be too easily removed and there is no reveal of VOID layer texts. For ideal implementation of the sticker, it is recommended to clean the surface (degrease).
When taking a photo through this foil, the resulting image is represented by a pinkish area. Only intense point sources in the form of a circle of a lighter shade of the colour can be noticeable. Basically, all smart phones are equipped with two cameras – the rear and the front one. Please do not forget to involve this to calculation of the number of pieces to be ordered, as to secure one cell phone, two stickers are required. Thanks to its small size – 20x10 mms this sticker is suitable for the front-facing camera as well, which does not overshadow the screen after overlaying the display, as it happens with larger stickers. According to you order, the stickers can be printed by your specified texts, numbering or logo using thermos-transfer printing (the price is listed without the printing).
Additionally, we can produce the sticker in any size and black, red or blue etc. colour. The minimum of pieces is 10,000 pcs. For any printing, the price is calculated on request (kindly see Contacts)
It is necessary to keep the sticker glued at least for 5 minutes to be perfectly adhered and work as it is supposed to.
The sticker can be printed with a corporate logo to maximize the security. The optimal security is also an incremental numbering of overlays.
The sticker has very similar properties like the rest of the offered seals from the group of non-residual stickers. However, this seal is optimized for cell phones surface finishes (smooth and rugged plastic, anodised light alloys, etched surface …) and its function is guaranteed for all types of portable camera devices.
The special technology of the VOID layer of this sticker guarantees the absence of residue after its removal and high adhesion even to problematic, not completely smooth surfaces. Unlike the other VOID stickers, this one does not separate when glued to the adhesive-retaining part attached to the substrate and to the top foil carrying the supplement of the revealed graphic motif. Although this sticker has very high adhesion to all types of surfaces, it does not leave any glue remains after removing. The glue consistency due to its cohesion is similar to gum. This, above all, also allows its application to complicated surfaces, from which the hologram stickers can be too easily removed and there is no reveal of VOID layer texts. For ideal implementation of the sticker, it is recommended to clean the surface (degrease).
When taking a photo through this foil, the resulting image is represented by a pinkish area. Only intense point sources in the form of a circle of a lighter shade of the colour can be noticeable. Basically, all smart phones are equipped with two cameras – the rear and the front one. Please do not forget to involve this to calculation of the number of pieces to be ordered, as to secure one cell phone, two stickers are required. Thanks to its small size – 20x10 mms this sticker is suitable for the front-facing camera as well, which does not overshadow the screen after overlaying the display, as it happens with larger stickers. According to you order, the stickers can be printed by your specified texts, numbering or logo using thermos-transfer printing (the price is listed without the printing).
Additionally, we can produce the sticker in any size and black, red or blue etc. colour. The minimum of pieces is 10,000 pcs. For any printing, the price is calculated on request (kindly see Contacts)

- Shape: rectangle
- Dimension: 20x10mms
- Colour: red diffuse (other colours to order)
Dimensions | 20mm x 10mm (0.787″ x 0.394″) |
Colour | Red |
Security level | low |
Financial costs | very low |
Shape | Rectangle |
Void layer | Yes |
Security base layer | VOID |
For cell phone cameras | YES |
Custom printing | Yes |
Weight | 0.000037 kg |
Specification
Examples
Production manual
Related products
-
H506 No Residue VOID sticker for cell phone camera lenses, round, 10 mm, black
from 0.053 € / pcs
from 0.043 € without VATon request400506Product detail -
H508 Non-residual VOID sticker for cell phone camera lenses, square, 20x20mm, black
from 0.074 € / pcs
from 0.06 € without VATon request400508Product detail -
H509 No Residue VOID sticker for cell phone camera lenses, rectangular, 20x10mm, black
from 0.08 € / pcs
from 0.065 € without VATon request400509Product detail -
H507 No Residue VOID sticker for cell phone camera lenses, round, 20 mm, black
from 0.074 € / pcs
from 0.06 € without VATon request400507Product detail -
H239 Non-residual red VOID sticker 60x30mm with high adhesion
from 0.133 € / pcs
from 0.108 € without VATin Stock400239Product detail -
H106 Non-residual tamper evident VOID OPEN adhesive tape 20mm 50m, red
from 18.556 € / pcs
from 15.086 € without VATin Stock400106Product detail -
H84 Non-residual VOID sticker for cell phone camera - red 20 x 20 mm
from 0.095 € / pcs
from 0.078 € without VATin Stock400084Product detail -
H83 Non-residual red circular VOID sticker with high adhesion
from 0.064 € / pcs
from 0.052 € without VATin Stock400083Product detail -
H117 Red non-residual rectangular VOID sticker with high adhesion
from 0.08 € / pcs
from 0.065 € without VATin Stock400117Product detail