H531 Non-residual round VOID sticker for mobile phone cameras, 10 mm, red
Special red round VOID stickers (diameter of 10 mm) are used to cover the lenses of mobile phone cameras in order to prevent any unauthorized picture taking in restricted areas.
The sticker meets the requirements on a very quick application, fool-proof barring of the camera use and absolutely trouble-free peel-off guaranteeing no glue residues are left on the covered areas. The VOID layer plays an important role here as it indicates any attempt to uncover the camera lens by highlighting the VOID inscription on the removed part of the sticker. Based on a prescribed security scenario, should any tampering with the camera lens be detected during an inspection, a respective security procedure is triggered off. ... More
The sticker meets the requirements on a very quick application, fool-proof barring of the camera use and absolutely trouble-free peel-off guaranteeing no glue residues are left on the covered areas. The VOID layer plays an important role here as it indicates any attempt to uncover the camera lens by highlighting the VOID inscription on the removed part of the sticker. Based on a prescribed security scenario, should any tampering with the camera lens be detected during an inspection, a respective security procedure is triggered off. ... More
Product description
Special red round VOID stickers (diameter of 10 mm) are used to cover the lenses of mobile phone cameras in order to prevent any unauthorized picture taking in restricted areas.
The sticker meets the requirements on a very quick application, fool-proof barring of the camera use and absolutely trouble-free peel-off guaranteeing no glue residues are left on the covered areas. The VOID layer plays an important role here as it indicates any attempt to uncover the camera lens by highlighting the VOID inscription on the removed part of the sticker. Based on a prescribed security scenario, should any tampering with the camera lens be detected during an inspection, a respective security procedure is triggered off. Typically, this may apply to any group tours in the premises where no picture taking is permitted, such as car industry hi-tech operations, nuclear power plants, state printing offices, new product launch events for selected groups of people and other higher security risk premises.
To maximize the security level, the sticker may be printed with a company logo and ideally complemented with an incremental numbering option (for a fee).
The sticker has similar qualities as other non-residual seals we offer, yet it is optimized to suit the surface treatment of mobile phone camera lenses.
Special production technology of this sticker’s VOID layer guarantees no residues are left on the surface after the sticker is peeled off as well as high adhesion to problematic, not completely smooth surfaces. Unlike other VOID stickers, when removed, it does not break up between the part stuck to the base and the top foil layer with the graphic design. Despite the very high adhesion to all kinds of surfaces, the sticker will leave no residues of glue when peeled off. The glue consistency in terms of bond strength is similar to that of adhesive rubber. This allows, among others, to apply the stickers to complex surfaces where hologram labels could be peeled off too easily and the VOID text would not come up. It is recommended to clean (de-grease) the surface for ideal application.
When taking pictures through this foil, the final photo comes out blurred in a slightly pink tone with only intensive spot lights visible as circles of a lighter shade of the colour. In reality, all smartphones are equipped with two cameras – the front and the rear one. Do not forget it when calculating the number of pieces as one mobile phone needs to be secured with two stickers.
Stickers are provided on a 105mm tape with cut-outs for the printer. The cut-out stickers are delivered in full sheets as it extends the lifetime and stability of the VOID material and adhesive layer. For fast and comfortable peel-off, we recommend using fine tip tweezers.
If requested, the stickers may be TTR printed in black with any text, numbering or logo that you specify (not included in the price). Minimum printing batch is 100 pcs.
Price for printing is to be calculated upon request.
The sticker must remain stuck for at least 5 minutes so it adheres well to the surface and works as designed.
The sticker meets the requirements on a very quick application, fool-proof barring of the camera use and absolutely trouble-free peel-off guaranteeing no glue residues are left on the covered areas. The VOID layer plays an important role here as it indicates any attempt to uncover the camera lens by highlighting the VOID inscription on the removed part of the sticker. Based on a prescribed security scenario, should any tampering with the camera lens be detected during an inspection, a respective security procedure is triggered off. Typically, this may apply to any group tours in the premises where no picture taking is permitted, such as car industry hi-tech operations, nuclear power plants, state printing offices, new product launch events for selected groups of people and other higher security risk premises.
To maximize the security level, the sticker may be printed with a company logo and ideally complemented with an incremental numbering option (for a fee).
The sticker has similar qualities as other non-residual seals we offer, yet it is optimized to suit the surface treatment of mobile phone camera lenses.
Special production technology of this sticker’s VOID layer guarantees no residues are left on the surface after the sticker is peeled off as well as high adhesion to problematic, not completely smooth surfaces. Unlike other VOID stickers, when removed, it does not break up between the part stuck to the base and the top foil layer with the graphic design. Despite the very high adhesion to all kinds of surfaces, the sticker will leave no residues of glue when peeled off. The glue consistency in terms of bond strength is similar to that of adhesive rubber. This allows, among others, to apply the stickers to complex surfaces where hologram labels could be peeled off too easily and the VOID text would not come up. It is recommended to clean (de-grease) the surface for ideal application.
When taking pictures through this foil, the final photo comes out blurred in a slightly pink tone with only intensive spot lights visible as circles of a lighter shade of the colour. In reality, all smartphones are equipped with two cameras – the front and the rear one. Do not forget it when calculating the number of pieces as one mobile phone needs to be secured with two stickers.
Stickers are provided on a 105mm tape with cut-outs for the printer. The cut-out stickers are delivered in full sheets as it extends the lifetime and stability of the VOID material and adhesive layer. For fast and comfortable peel-off, we recommend using fine tip tweezers.

Price for printing is to be calculated upon request.
The sticker must remain stuck for at least 5 minutes so it adheres well to the surface and works as designed.
Liner thickness | 70µm |
Foil thickness | 130µm |
Colour | Red |
Dimension | 10mm (0.394″) |
Price | 1 label |
Financial costs | low |
Shape | Round |
Security level | medium |
For cell phone cameras | YES |
Custom printing | Yes |
Void layer | Yes |
Weight | 0.000043 kg |