H51 Two-layered tamper evident KTL labels numbering to a depth

Numbering is brought in the adhesive layer, and it can not be faked by printing on the upper side of the film.

The foil seal KTL - adhesive labels on tape disposing of white window for printing or description of a red window with numbering.

Home security asset ordinary-looking stickers is virtually tamper-proof numbering technique and its behavior when attempting to unsticking. When attempting to overturning of the label will be a division between the top and bottom layer. The bottom layer of adhesive remains firmly bonded to the substrate. Now in this layer is printed with a unique serial number, which on the contrary is completely missing on the upper layer, which is at this point only the transparent window. This fact prevents falsification by chemical or mechanical removal of the surface printing stickers and other printing numbers, because on the surface plate with no press is there. Obstacle falsification method for the production of complete security media, the technological demands of the process. Sticker is additionally equipped with the tamper evident (void), as shown in the illustrative drawings. When the separation is in place debonding layer uncovered by regular grid of words "VOID" that the moment is not to peel off the sticker under any circumstances evident. Neither the lower nor upper layer is over the distribution of stickers sticky.

The label shows excellent adhesion on all kinds of substrate from powder coated smooth surfaces to the grained surfaces made of thermoplastics or unpainted wood structured. Labels are useful for filling cabinets, locks, transport boxes of all kinds of materials, sealing the door seals as transport etc.

This safety feature is in terms of physical implementation designed as tape, with the difference that the individual labels are pre-cut and taped with paper, so as to allow the printing. The width of the coil is therefore equal to the width of the plate and is 50 mm. The label length is 150 mm.

We offer printing of labels according to your requirements - label specification and conditions must be agreed upon before ordering this medium.

• material: PE
• label size: 150 × 50 mm
• roll 50 m: 333 pcs of labels
• Numbering: incremental
• perforation: upon 150 mm