H87 Universal tape for moisture indication 30mm x 1m

Self-adhesive white tape with a red backing layer whose dye dissolves on contact with water and colours the white top layer red. This process is irreversible - the sticker remains red even after drying and becomes a conclusive detector of liquid contamination. The tape can be cut or scored into any size shape you need for your application. In the case of sticker use in mobile electronics, it is most often placed on a printed circuit board near charging, data and audio connectors. Since the detection strip itself has no tamper-proof security features, the optimal solution is to place a custom hologram security seal over the edges of the device chassis. The strip is not used to measure relative humidity. It only reacts to direct contact with water or liquid (condensation, dripping, soaking).

Width: 30 mm x required length (1m x number of pieces)
Thickness with liner 230um
Thickness without liner 175um