R8.1 Hot stamping foil holder and reel stand to the R8 press 80 mm

The R8 hot stamping press offers this hot stamping foil holder and reel stand as its accessory in order to facilitate gold printing application. The holder is equipped with a height-adjustable draw spindle that prevents any early contact of the foil with the hot stamp and a main unreeling spindle with side plates holding the hot stamping foil with the inner spooling diameter of 25mm. These side plates are hindered with springs and double-sided backstops preventing any undesirable spontaneous unreeling. The reel stand operates with hot stamping foils of up to 80 mm wide – fully covering the largest possible stamping surface.

Weight

0.23 kg