Any questions?
+420 603 357 606
0
Total : 0 €
0 € without VAT
Go to Cart

H533 Non-residual rectangular VOID sticker for mobile phone cameras, rectangle 40 x 10 mm, red

A special rectangular red VOID sticker (size 40 x 10 mm) to cover the camera lenses on mobile phones in order to prevent any unauthorized pictures taking in restricted areas.
The sticker meets the requirements on a very quick application, fool-proof barring of the camera use and absolutely trouble-free peel-off guaranteeing no glue residues are left on the covered areas. The VOID layer plays an important role here as it indicates any attempt to uncover the camera lens by highlighting the VOID inscription on the removed part of the tape. Based on a prescribed security scenario, should any tampering with the camera lens be detected during an inspection, a respective security procedure is triggered off. ... More
Financial costs "> "> "> ">
Security level "> "> "> ">
Variant :
Availability: in Stock 1000+ pc.
At yours: Thursday 10.10.2024
Price overview :
1–100 pc. 0.166 € 0.135 € without VAT
101–1000 pc. 0.134 € 0.109 € without VAT
1001+ pc. 0.112 € 0.091 € without VAT
Quantity:
Total price :
€ without VAT
Price: 1 label
Are you interested in similar products with your own graphic design?
Custom design

Product description

A special rectangular red VOID sticker (size 40 x 10 mm) to cover the camera lenses on mobile phones in order to prevent any unauthorized pictures taking in restricted areas.
The sticker meets the requirements on a very quick application, fool-proof barring of the camera use and absolutely trouble-free peel-off guaranteeing no glue residues are left on the covered areas. The VOID layer plays an important role here as it indicates any attempt to uncover the camera lens by highlighting the VOID inscription on the removed part of the tape. Based on a prescribed security scenario, should any tampering with the camera lens be detected during an inspection, a respective security procedure is triggered off. Typically, this may apply to any group tours in the premises where no picture taking is permitted, such as car industry hi-tech operations, nuclear power plants, state printing offices, new product launch events for selected groups of people and other higher security risk premises.

To maximize the security level, it is possible to print a company logo on the sticker. Incremental numbering provides an optimum level of security (for a fee).

The sticker shows qualities very similar to those of other non-residual seals that we offer, it is optimized to surface treatment of mobile phone camera lenses.

Special production technology of this sticker’s VOID layer guarantees no residues are left on the surface after the sticker is peeled off as well as high adhesion to problematic, not completely smooth surfaces. Unlike other VOID stickers, when removed, it does not break up between the part stuck to the base and the top foil layer with the graphic design. Despite the very high adhesion to all kinds of surfaces, the sticker will leave no residues of glue when peeled off. The glue consistency in terms of bond strength is similar to that of adhesive rubber. This allows, among others, to apply the stickers to complex surfaces where hologram labels could be peeled off too easily and the VOID text would not come up. It is recommended to clean (de-grease) the surface for ideal application.

When taking pictures through this foil, the final photo comes out blurred in a slightly pink tone with only intensive spot lights visible as circles of a lighter shade of the colour. In reality, all smartphones are equipped with two cameras – the front and the rear one. Do not forget it when calculating the number of pieces as one mobile phone needs to be secured with two stickers.


Stickers are provided on a 90mm tape with cut-outs for the printer. The cut-out stickers are delivered in full sheets as it extends the lifetime and stability of the VOID material and adhesive layer. For fast and comfortable peel-off, we recommend using fine tip tweezers.

If requested, the stickers may be TTR printed in black with any text, numbering or logo that you specify (not included in the price). Minimum printing batch is 100 pcs.

These stickers are also designed for oleophobic surfaces, if the stickers are glued to normal surfaces (ordinary glass, textured plastics, etc.) the stickers may leave a trace of adhesive. The adhesive can be easily removed with regular isopropyl alcohol.

Price for printing is to be calculated upon request.

The sticker must remain stuck for at least 5 minutes so it adheres well to the surface and works as designed.

Colour Red
Liner thickness 70µm
Foil thickness 130µm
Dimensions 40mm x 10mm (1.575″ x 0.394″)
Price 1 label
Financial costs low
Shape Rectangle
Security level medium
For cell phone cameras YES
Custom printing Yes
Void layer Yes
Weight 0.000144 kg

Specification

Examples

Production manual

Related products