H27 Prefabricated master transparent hologram for ID card

A master transparent hologram sticker with a thickness of 100μm, designed for easy visual authorization small batch identification cards. Due to a master multilayer technology can be most areas hologram full text and graphical elements with minimal impact on readability substrate. This is made possible thanks to the layout of individual texts and symbols on different layers, which in practice means that the hologram will be seen from one angle only some graphic elements. In contrast, thus guaranteeing easy visible authorization because the hologram presence in virtually all lighting conditions and from all angles, even from a distance visible.

Unlike standard hologram stickers this adhesive label made on a supporting film of a thickness of the total 100μm because of its easier handling during sticking. From the very beginning, this sticker designed for manual application, and particularly on a plastic ID card. Because the sticker is just the size of the card, it is necessary to stick to it exactly so that the film is higher than its edges. These needs caters to gain material 100μm, which makes the sticker stiffer and significantly helps convenient and accurate manual stick to the desired position.

Dimensions transparent hologram are given the most common type of identification cards according to ISO / IEC 7816, therefore 85,725 mm x 53,975 mm, respectively. 33/8 "x 21/8". It is therefore the dimensions of bank cards, phone cards, driving licenses EU but also corporate and attendance systems or internal club ID card with a photo on which is enabled by access to facilities. Now the latter two categories are the most offered to deploy hologram security features.In addition to speeding up and facilitating visual inspection authorization when the card is prevented falsification in exchange photos on the cards. Identification cards with photographs represent a relatively strong security for access to the facility; weakness is the theft of an ID card and a mere replacement of the original picture on the card. If the whole area of overlap of this security hologram, it is impossible to change the photo without damaging the hologram or the card itself. Last but not least, the use of transparent film is ensuring at present very popular loyalty and discount cards.

To transfer the hologram to the card is not necessary to use a technology for hot stamping, as the foil is provided with the same transparent adhesive layer as the other hologram stickers. Although holographic effect rainbow stickers transitions in this very pronounced, does not affect the legibility of the information on the card, as gradients are visible only under specific angles.